Configure Dual SIM Settings
Configure Dual SIM Settings |
This feature applies to dual-SIM devices only.
Set the Default Mobile Data and Default Calling SIM Cards
Go to
and set SIM 1 or SIM 2 as the default mobile data or default calling SIM card.Enable Call Forwarding Between SIM Cards
After enabling call forwarding for both SIM cards, if incoming calls cannot reach one of the SIM cards, they will be forwarded to the other one.
This feature requires the support of your carrier. For details, contact your carrier.
-
Go to
. -
Select a call forwarding mode and turn on the corresponding switch.
Call forwarding between two SIM cards will be enabled when it is configured for both SIM cards.
Quickly Switch the Default Mobile Data SIM
If two SIM cards have been installed on your phone, you can use a shortcut to quickly switch the default mobile data SIM card.
-
Swipe down from the status bar to open the notification panel, then swipe down again to show all shortcuts. Turn on Mobile data.
-
Touch the text under
until a prompt is displayed, then select a SIM card and touch OK.
When the prompt is displayed, touch Settings to access the SIM management screen.
Enable Dual SIM 5G
If both of the SIM cards in your device support 5G, you can enable 5G on both simultaneously.
Go to
.Turn on Dual SIM 5G, the 5G switches for both cards will be turned on.
If you turn off Dual SIM 5G, the 5G for the primary SIM card will still be turned on, 5G on the secondary SIM card will be disabled and the 5G switch for the secondary card will be hidden.
The Dual SIM 5G switch is turned off by default. When Dual SIM 5G is turned off, the 5G switch for the secondary SIM card is not shown.
After Dual SIM 5G is turned on, turning off the 5G switch for either SIM card will not turn off the Dual SIM 5G switch.
微信扫描二维码分享文章
More Support

